CV Power supplies 24 V

Power your light inspiration, wherever it is and whatever form it takes, with your choice of constant voltage driver 24 V from the OSRAM range. You can even design these slender power supplies into tight, flat luminaires and suspended ceilings, and use them in SELV installations inside or even outside (as long as they are in suitable luminaires). If you are creating ambiance with light, perhaps in shoplighting designed to bring out the best in products, LED backlighting or bar lighting, or if you are designing striking architainment, you may find your ideal driver within this range.

CV Power supplies 24 V

Product data sheet
Product family features
  • DC mode functionality
  • Type of protection: IP66 and IP67
  • Surge protection: up to 4 kV (L-N) / 6 kV (L/N-PE)
  • Wide operating temperature range: -30…+55 °C
  • Lifetime: up to 50,000 h (temperature at max. tc )
Product family benefits
  • Large range of products from 20 W to 250 W
  • Installation in very cold and hot environments
  • Very stable output power
  • High electronical reversible short-circuit, overload, overtemperature protection
  • Smart Power Supply: boosting power to turn on cold LEDs
  • Independent installation possible
Family datasheet

Electrical data

Nominal output power 75 W

Partial load 0…75 W

Mains frequency 50…60 Hz
Nominal voltage 220…240 V
Nominal current 0.38 A
Device power loss 8.5 W

Maximum

Power factor λ 0.95

Minimum

ECG efficiency 89 %

At full load and 230 V

Inrush current 41 A

twidth = 200 µs (measured at 50 % Ipeak)

Galvanic isolation primary/secondary 3.75 kV

SELV

Nominal output voltage 24 V

Electronically stabilized, line ripple maximum ±0.2 V

Input voltage AC 198…264 V

Permitted voltage range

Dimensions & weight

Length 241.0 mm
Width 43.0 mm
Height 30.0 mm
Mounting hole spacing, length 227.0 mm
Product weight 560.00 g

Temperatures & operating conditions

Ambient temperature range -20…+60 °C
Permitted rel. humidity during operation 5…85 %

Maximum 56 days/year at 85 %

Capabilities

Suitable for fixtures with prot. class II
Overheating protection Automatic reversible
Overload protection Automatic reversible
Short-circuit protection Automatic reversible
No-load proof Yes
Dimmable No

With OPTOTRONIC dimmers

Number of channels 1

Certificates & standards

Type of protection IP64
Standards Acc. to IEC 61347/Acc. to IEC 60598/Acc. to IEC 62384/Acc. to EN 55015:2006 + A1:2007/Acc. to EN 61000-3-2/Acc. to EN 61547
Approval marks – approval CE / VDE / VDE-EMC / CB / RCM / ENEC 10

Logistical data

Commodity code 850440829000

EAN

Unit
Piece

Dimension l x w x h

Weight

Volume

4008321362476 UNV
1
560.00g
4008321362483 VS
10
278mm x 126mm x 268mm 6146.00g 9.39dm³
Maximum number of LED modules per ECG 34
Maximum number of LED modules per ECG 24
Maximum number of LED chains per ECG 1
Maximum number of LED modules per ECG 25
Maximum number of LED modules per ECG 12
Maximum length of LED module per ECG 10.3 m
Maximum length of LED module per ECG 4.1 m
Maximum length of LED module per ECG 11.4 m
Maximum length of LED module per ECG 12.45 m
Maximum length of LED module per ECG 20.8 m
Maximum length of LED module per ECG 18.3 m
Maximum length of LED module per ECG 15 m
Maximum length of LED module per ECG 3.9 m

EAN

METEL code

STK number

4008321362476 OSROT7524E 4031168