CV Power supplies 24 V

Remove the limitations when you install light outside, with OPTOTRONIC CV 24 V power supplies. Ruggedly built, if you need a constant voltage source that can cope with damp or wet conditions and extremes of temperature, then a product from this range could be just what you need. These drivers are suitable for use in tight, flat luminaires and in suspended ceilings, and may be used outdoors (only within suitable luminaires). If you are creating signage, OPTOTRONIC CV 24 V power supplies work well with OSRAM signage LED modules such as BackLED and BoxLED, and in other settings they can be paired with suitably robust and protected modules such as LINEARlight Flex Protect, to give great performance, reliability and efficiency.

CV Power supplies 24 V

Product data sheet
Product family features
  • DC mode functionality
  • Type of protection: IP66 and IP67
  • Surge protection: up to 4 kV (L-N) / 6 kV (L/N-PE)
  • Wide operating temperature range: -30…+55 °C
  • Lifetime: up to 50,000 h (temperature at max. tc )
Product family benefits
  • Large range of products from 20 W to 250 W
  • Installation in very cold and hot environments
  • Very stable output power
  • High electronical reversible short-circuit, overload, overtemperature protection
  • Smart Power Supply: boosting power to turn on cold LEDs
  • Independent installation possible
Family datasheet

Electrical data

Nominal input voltage 220…240 V
Mains frequency 50…60 Hz
Input voltage AC 198…264 V

Permitted voltage range

Total harmonic distortion < 20 %
Power factor λ 0.80

Minimum

ECG efficiency 83 %
Device power loss 4.0 W

Maximum

Inrush current 10 A
Max. ECG no. on circuit breaker 10 A (B) 43
Max. ECG no. on circuit breaker 16 A (B) 68
Max. ECG no. on circuit breaker 25 A (B) -
Surge capability (L-N) 1 kV
Nominal output voltage 24 V

±1.0 V

U-OUT (working voltage) 24 V
Nominal output power 20 W

Partial load 0.5…20 W

Galvanic isolation SELV
Galvanic isolation primary/secondary 3 kV

Dimensions & weight

Product weight 108.00 g
Cable cross-section, input side 0.75…1.5 mm²
Cable cross-section, output side 0.5…1.5 mm²
Wire preparation length, input side 10 mm
Wire preparation length, output side 10 mm
Cable/wire length, input side -
Cable/wire length, output side -
Length 109.0 mm
Height 35.0 mm
Width 50.0 mm

Colors & materials

Casing material Plastic

Temperatures & operating conditions

Ambient temperature range -20…+45 °C
Maximum temperature at tc test point 70 °C
Max.housing temperature in case of fault 90 °C
Permitted rel. humidity during operation 5…85 %

Maximum 56 days/year at 85 %

Lifespan

ECG lifetime 30000 h

Additional product data

Encapsulated No

Capabilities

Dimmable No

With OPTOTRONIC dimmers

Overheating protection Automatic reversible
Overload protection Automatic reversible
Short-circuit protection Automatic reversible
No-load proof Yes
Suitable for fixtures with prot. class II
Type of connection, output side Screw terminal

Certificates & standards

Approval marks – approval CE / ENEC 10 / VDE / VDE-EMC / RCM
Standards Acc. to IEC 61347-2-13/Acc. to IEC 62384/Acc. to EN 55015/Acc. to IEC 61000-3-2/Acc. to IEC 61000-3-3/Acc. to IEC 61547
Protection class II
Type of protection IP20

Logistical data

Temperature range at storage -40…85 °C
Commodity code 850440829000

EAN

Unit
Piece

Dimension l x w x h

Weight

Volume

4050300618111 UNV
1
108.00g
4050300618128 VS
20
270mm x 105mm x 229mm 2396.00g 6.49dm³

EAN

METEL code

STK number

4050300618111 OSROT2024 4031160